For Renault CAN Clip Diagnostic Interface is designed to diagnose Renault cars models With Multi-Functions ( Check below function description part),Testing System including ENGINE, Automatic Transmission, Air Conditioning System, SRS, ABS, ASR, MPL,Anti-theft system, KEYZESS GO System and OBD-II systems.
For Renault second generation, contains maintenance information with full English operation, with the testing and programming features of all OBDII cars Of France Original Cars, suitable for personal use and companies wishing to seize the popular car market.
– computer test
– automatic test of all computers
– airbag test
– scan tool (OBD tests)
– Base Doc (access to Technical Notes)
– physical measurements
ENGINE, Automatic Transmission, Air Conditioning System, SRS, ABS, ASR, MPL,Anti-theft system, KEYZESS GO System and OBD-II systems etc…
1 for Renault CAN Clip Interface
2 cables for CAN Clip <-> Car connection
1 cable for CAN Clip <-> PC connection
1 software CD
Connection Display :
*For Renault Can Clip 12 Pin Cable Connection Picture
1.After finish Installation, DO NOT run your CLiP!!!
2.copy the RSRwin.ext to C:CLIP_X91LibApplication
3. Then run your CLiP, choose “Register me now” and in the next
Windows,Are you part of the Renault Network, please choose “NO”
4. Use this Key for Registration:
Detailed Installation Instruction:
1. Uninstall previous version of CAN-Clip if you have
2. IF your 1st installation: Run Crack.reg from the folder
“Crack! CAN-Clip” 1ST OF ALL!!!!!
After those steps are done, install CAN-Clip
After installation finish & you reboot, you will get SPX Registration….
To avoid PERMANENTLY this, do the following steps:
1. Alt+Ctrl+Del (Kill process RSRWin.exe)
2. Delete RSRWin.exe (in C:Windows)
3. Use Regedit (and Delete “ALL” values with name RSRWin)
4. Reboot your machine!!!
5. NO MORE flash for SPX Registration…
Before your 1st Running with the program make those steps:
You NEED to have 1 Car (and ALWAYS clip running-working)
when you have Car!!!
1. Connect your Clip Sonde Can Interface 1st in your Car (OBD Slot)
2. Turn Ignition ON (NOT Engine running)
3. Connect your Clip Sonde Can Interface via USB cable with your computer
4. Start to installing ALL the Drivers (that they will be appearing) and
you can find those in: C:WINDOW/Ssystem32/drivers or from this DVD
in the folder “CAN-Clip Drivers”.
5. You must INSTALL 4 Drivers (4 TIMES the same thing)
After you finish, you can RUN now finally your CAN-Clip Software….